What conditions do my product's status lights indicate?

• The lights on top of the projector indicate the projector's status and let you know when a problem occurs.
  
  

  Indicator Light	Status	Description
  Power Light	Won't turn on	Make sure the power cord is connected securely both at the power outlet and the projector. If you have just replaced the lamp, make sure the cover is securely fastened.
  Power Light	Green	The projector is operating normally.
  Power Light	Flashing green	The projector is warming up. Wait for the image to appear.
  Power Light	Orange	The projector is in standby mode. You can unplug it or press the Power button to turn it on.
  Power Light	Flashing Orange	The projector is cooling down. Wait for the light to become solid before unplugging it.
  Lamp/Temperature	Flashing orange (quickly)	The projector is too hot. Make sure the temperature surrounding the projector does not exceed 950F and there is plenty of space around and under the projector for ventilation. Clean the air filter, if necessary.
  Lamp/Temperature	Flashing red (half-second intervals)	The lamp may be burned out. First make sure the lamp cover is securely installed. If that's not the problem, remove the lamp and replace it.
  Lamp/Temperature	Flashing red (1-second intervals)	There is an internal error in the projector. Turn the projector off and unplug it. Contact EPSON for help.
  Lamp/Temperature	Red	The projector is overheating, which turns the lamp off automatically. Wait until the cooling fan stops, then unplug the power cord. Plug the power cord back in and press the Power button. Make sure the room temperature is not above 95 0F (35 0C) and there is plenty of space around and under the projector for ventilation. The air filter may be clogged. Clean or replace it. If the projector continues to overheat after you clean the air filter, the problem may be caused by damage to the cooling fan or temperature sensor. Contact EPSON for help. Warning: Except as specifically explained in the User's Guide, do not attempt to service this product yourself.