Support Projectors PowerLite Series Epson PowerLite 735c

How should I clean the air filter?

  • Follow these steps to clean the air filter:
    1. Turn off the projector, allow it to cool down, and unplug the power cord.

    2. To clean the filter, EPSON recommends using a small vacuum cleaner designed for computers and other office equipment. If you don't have one, gently clean the filter using a very soft brush (such as an artist's camel-hair brush).


    Contact your dealer or call EPSON at (800) 873-7766 to obtain a new one. In Canada, please call (800) 463-7766 to locate a dealer.

    3. If the dirt is difficult to remove or if the filter is broken, replace it. Contact your dealer or call EPSON at (800) 873-7766 in the United States to obtain a new one. In Canada, please call (800) 463-7766 for dealer referral.

    To remove the filter, lift up the tab as shown below to release it.


    Note: A new air filter is included with the replacement lamp. You should replace the filter when you replace the lamp.
Was this helpful? Thank you for the feedback!
Was this helpful?
Please tell us why this was not helpful.