The colors in the projected image don't look right. What should I do?
-
Because of the different technologies used, your projected image may not exactly match the colors on your notebook or computer monitor.
- Try selecting a different Color Mode. See Adjusting the Color Mode for information about the Color Mode button. You can also change the color mode in the Image menu to adjust the color.
- If you're displaying video, adjust the Color Saturation and Tint settings on the Image menu.
- Adjust the Brightness, Contrast, and Color Adjustment settings on the Image menu.
- Make sure the input signal setting on the Signal menu matches the signal from the connected device. If the image is too purple and you've connected a computer, RGB video device, or component video device to the Computer1(Component) or Computer2(Component) port, select Computer1 or Computer2 as the input source. If you're projecting from a composite video or S-Video source, make sure the correct Video Signal is selected on the Signal message.
Was this helpful? Thank you for the feedback!