My image has a blue cast when I connect my video equipment to my product with a VGA connection. What should I do?
-
The problem could be caused by the connection or configuration of your video equipment. Check the following:
- Make sure your component video cable is properly connected. The connectors on the cable are color-coded. The red, green, and blue connectors should be attached to the red, green, and blue component video-out connectors on your equipment and the red, green, and blue component video-in connectors on the projector.
- Make sure the connected video equipment is set up to output video to component video.
Published: 22-Dec-2009
Was this helpful? Thank you for the feedback!