How do I connect a monitor to my product so I can simultaneously view images on the monitor and from my product?
-
Make sure the projector and computer are turned off. Disconnect your monitor cable from your computer's video port and connect it to the projector's Monitor Out port. Then connect the VGA computer cable that came with your projector to your computer's video port and to the projector's Computer1 port. (Do not connect it to the projector's Computer2 port; this will not work.)
If your image colors look wrong, try changing the Input Signal setting to RGB.
For the external monitor to work when the projector is in Standby mode, open the Extended menu, select Standby Mode, then Communication On.
Note: Some LCD monitors may not be able to display the image correctly. If you have trouble displaying the image, connect a multiscan monitor. If you're projecting computer images, make sure the computer's refresh rate is set to 65 Hz or greater.
Published: 2-Feb-2011
Was this helpful? Thank you for the feedback!