There is no sound. What should I do?
-
Try the following solutions:
- Adjust the projector's volume settings.
Note: The audio volume level is different for each input source and may need to be adjusted. - Press the A/V Mute button on the remote control to resume video and audio if they were temporarily stopped.
- Press the Source Search button to switch to the correct input source, if necessary.
- Check your computer or video source to make sure the volume is turned up and the audio output is set for the correct source.
- Check the audio cable connection between the projector and your video source.
- If you are using the USB Display function, turn on the Output audio from the projector setting in the Epson USB Display Settings program on your computer.
- Adjust the projector's volume settings.
Published: 5-Oct-2011
Was this helpful? Thank you for the feedback!