How do I charge the Epson RF 3D Active Shutter Glasses?
-
Charge the glasses when the status light on the glasses flashes red to indicate a low battery.
- Connect the smaller end of the charging cable to the port on the bridge of the glasses.
Note: Make sure you connect the cable in the correct orientation or you may damage the glasses or cable.
- Connect the other end of the cable to the USB-A port on the projector.
Note: The projector must be turned on to charge the glasses.
- Connect the smaller end of the charging cable to the port on the bridge of the glasses.
Published: 15-May-2013
Was this helpful? Thank you for the feedback!