The product indicates an error. What should I do?
-
The lights on the projector indicate the projector status and let you know when a problem occurs. Check the status and color of the lights and look for a solution in the table here.
1 Status light 2 Lamp light 3 Temp light 4 Power light Power light Status light Lamp light Temp light Status and solution Blue Blue Off Off Normal operation Blue Flashing blue Off Off Warming up; wait for an image to appear Blue Off Off Off Standby or sleep mode Blue Flashing blue Off Off Shutting down; when the Status light stops flashing, you can unplug the projector Blue Varies Off Flashing orange Projector is too hot - Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects
- Clean or replace the air filter
- Make sure the environmental temperature is not too hot
Off Flashing blue Off Orange Projector has overheated and turned off; leave it turned off to cool down for about five minutes, then do the following: - Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects
- Clean or replace the air filter
- If operating the projector at high altitude, turn on High Altitude Mode
- If the problem persists, unplug the projector and contact Epson for help
Off Flashing blue Orange Off Lamp has a problem - Check to see if the lamp is burned out, broken, or installed incorrectly; reseat or replace the lamp as necessary
- Clean or replace the air filter
- If operating the projector at high altitude, turn on High Altitude Mode
- If the problem persists, unplug the projector and contact Epson for help
Flashing blue Varies Flashing orange Off Replace the lamp soon to avoid damage; do not continue using the projector Off Flashing blue Off Flashing orange A fan or sensor has a problem; turn the projector off, unplug it, and contact Epson for help Off Flashing blue Flashing orange Flashing orange Auto Iris error; turn the projector off, unplug it, and contact Epson for help Off Flashing blue Orange Orange Power error (ballast); turn the projector off, unplug it, and contact Epson for help Off Blue Flashing orange Off Internal projector error; turn the projector off, unplug it, and contact Epson for help Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and contact Epson for help.
Published: 17-Oct-2013
Was this helpful? Thank you for the feedback!