How do I charge the Epson RF 3D Active Shutter Glasses?
-
Charge the glasses when the status light on the glasses flashes red to indicate a low battery.
- Connect the smaller end of the charging cable to the port on the bridge of the glasses.
Note: Make sure you connect the cable in the correct orientation or you may damage the glasses or cable.
- Do one of the following:
- Plug the other end of the charging cable into a powered USB port on a computer or other device.
- Plug the other end of the charging cable into a USB-to-AC adapter with the following specifications:
Input: 100-240V, ~0.15A, 50-60Hz
Output: 5V=1A
- Connect the smaller end of the charging cable to the port on the bridge of the glasses.
Published: 30-Jan-2014
Was this helpful? Thank you for the feedback!