How do I use the WirelessHD Picture-in-Picture feature?
-
See below.
Using the WirelessHD Picture in Picture Feature
If you have connected multiple video sources to the WirelessHD transmitter, you can use the Picture in Picture (P-in-P) feature to wirelessly project images from two separate sources at the same time.- Press the P-in-P button on the remote control.
- Do the following to control the P-in-P display:
- Press the Input button on the remote control or the WirelessHD transmitter to change the video source displayed in the sub-screen. Keep pressing the button to cycle through all of the connected video devices.
- Press the Output button on the remote control or the WirelessHD transmitter to change the position of the sub-screen. The screen moves counterclockwise from corner to corner each time you press the Output button.
- Press and hold the P-in-P button on the remote control to switch the sources shown in the main display and the sub-screen.
- When you are finished using Picture in Picture, press the P-in-P button on the remote control to resume normal projection.
Published: 28-Aug-2014
Was this helpful? Thank you for the feedback!