Only part of the picture is displayed or the image looks distorted. What should I do?

• If only a partial computer image appears, try the following solutions:
  • Press the Auto button on the remote control to optimize the image signal.
  • Make sure you selected the correct Screen Type setting for the screen being used.
  • Make sure the Scale setting in the Extended menu is turned off.
  • Try adjusting the image position using the Screen Position menu setting.
  • Press the Aspect button on the remote control to select a different image aspect ratio.
  • If you zoomed into or out of the image using the E-Zoom buttons, press the Esc button until the projector returns to a full display.
  • Check the cables connecting the computer or video source to the projector. Try connecting different cables.
  • Check your computer display settings to disable dual display and set the resolution within the projector's limits. (See your computer manual for details.)
  • Check the resolution assigned to your presentation files to see if they are created for a different resolution than you are projecting in. (See your software help for details.)
  Related tasks
  Setting the Screen Type
  Related references
  Input Signal Settings - Signal Menu
  Projector Setup Settings - Extended Menu
  Supported Video Display Formats