I see static or noise in the image. What should I do?
-
If the projected image seems to contain electronic interference (noise) or static, try the following solutions:
- Check the cables connecting your computer or video source to the projector. They should be:
- Separated from the power cord to prevent interference
- Securely connected at both ends
- Not connected to an extension cable
- No longer than 10 feet (3 m) for VGA/computer cables or 24 feet (7.3 m) for HDMI cables
- Check the settings on the projector's Signal menu to make sure they match the video source. If available for your video source, adjust the Progressive and Noise Reduction settings.
- Select a computer video resolution and refresh rate that are compatible with the projector.
- If you are projecting from a computer, press the Auto button on the remote control to automatically adjust the tracking and sync. If the problem remains, display a uniformly patterned image on the screen and manually adjust the Tracking and Sync settings.
- If you connected an extension power cable, try projecting without it to see if it caused interference in the signal.
- For sources connected to the DisplayPort, change the DisplayPort EQ Setting in the Signal menu.
Displaying From a PC Laptop
Displaying From a Mac Laptop
Related references
Input Signal Settings - Signal Menu
Supported Video Display Formats
- Check the cables connecting your computer or video source to the projector. They should be:
Published: 18-Mar-2015
Was this helpful? Thank you for the feedback!