How do I change the image source?
-
If you connected multiple image sources to the projector, such as a computer and DVD player, you may want to switch from one image source to the other.
Note: If you turned on the Auto Source Search setting in the Extended menu, the projector automatically switches to another detected image source if the signal to the current image source is lost.
- Make sure the connected image source you want to use is turned on.
- For video image sources, insert a DVD or other video media and press its play button, if necessary.
- Do one of the following:
- Press the Source Search button on the projector or the Search button on the remote control until you see the image from the source you want.
- Press the button for the source you want on the remote control.
1 HDMI port source 2 HDBaseT port source 3 Computer port source 4 Network port source 5 SDI port source (not supported for Pro L1715SNL) 6 BNC port source 7 DVI-D port source - Press the Home button on the remote control and select your image source.
- Press the Source Search button on the projector or the Search button on the remote control until you see the image from the source you want.
Projector Setup Settings - Extended Menu
Published: 11-Jan-2018
Was this helpful? Thank you for the feedback!