When and how should I clean or replace the air filter?
-
See below.
Cleaning the Air Filter and Vents
Clean the projector's air filter or vents if they get dusty, or if you see a message telling you to clean them.Caution:
Do not use water or any detergent to clean the air filter. Do not use canned air, or the gases may leave a flammable residue.- Turn off the projector and unplug the power cord.
- Slide the air filter cover latch and open the air filter cover.
- Pull the air filter out of the projector.
- Vacuum the front of the air filter (the side with the tabs) to remove any remaining dust.
Note: If dust is difficult to remove or the air filter is damaged, replace the air filter.
- Place the air filter back in the projector as shown.
- Close the air filter cover and slide the latch.
Turning Off the Projector
Replacing the Air Filter
You need to replace the air filter in the following situations:- After cleaning the air filter, you see a message telling you to clean or replace it
- The air filter is torn or damaged
You can replace the air filter while the projector is mounted on the wall or ceiling.
- Turn off the projector and unplug the power cord.
- Slide the air filter cover latch and open the air filter cover.
- Pull the air filter out of the projector.
Note: Air filters contain polypropylene. Dispose of used air filters according to local regulations.
- Place the new air filter in the projector as shown.
- Close the air filter cover and slide the latch.
Turning Off the Projector
Published: 19-Nov-2020
Was this helpful? Thank you for the feedback!