Support Scanners FastFoto Series Epson FastFoto FF-640

I see lines through my scanned images. What should I do?

  • If spots or lines appear in all your scanned images, follow these steps to clean the scanner glass:

    1. Turn off the scanner and unplug the AC adapter.
    2. Disconnect any connected cables.
    3. Pull down on the cover open lever and open the scanner cover.
    4. Wipe off any dust or dirt on the glass scanning surfaces using the included microfiber cloth or a soft, dry cloth.

      Note: If the glass surfaces are stained with grease or some other hard-to-remove material, use a small amount of glass cleaner on a soft cloth to remove it. Wipe off all remaining liquid.

      Caution:
      Do not spray glass cleaner directly on the scanning surfaces. Be careful not to place too much force on the glass.

    5. Close the scanner cover.
    6. Plug in the AC adapter and turn on the scanner.
Published:  20-Dec-2016 Was this helpful? Thank you for the feedback!
Was this helpful?
Please tell us why this was not helpful.