Support Projectors PowerLite Series Epson PowerLite Home Cinema 500

Nothing projects on the screen. What should I do?

  • Try the following:
    • Press the A/V Mute button to see if the image was temporarily turned off.
    • Make sure all necessary cables are securely connected and the power is on for the projector and connected video sources.
    • Press the projector's power button to wake it from standby or sleep mode. Also see if your connected computer is in sleep mode or displaying a blank screen saver.
    • If you unplugged the projector and plugged it right back in, press the power button to turn on the projector (with Direct Power On enabled).
    • Check the settings on the Signal menu to make sure they are correct for the current video source.
    • Adjust the Brightness setting or select the Normal Power Consumption setting.
    • Check the Display setting to make sure Messages is set to On.
    • If the projector does not respond when you press the control panel buttons, the buttons may be locked. Unlock the buttons.
    • If the projector does not respond when you press buttons on the remote control, make sure the remote receivers are turned on.
    • For images projected over a network with Windows Media Center, reduce the screen size from full screen mode.
    • For images projected over a network with Windows DirectX, turn off DirectX functions.


Published:  14-Nov-2012 Was this helpful? Thank you for the feedback!
Was this helpful?
Please tell us why this was not helpful.