Home Support Projectors PowerLite Series Epson PowerLite W39

How do I connect a monitor to my product so I can view the same image on a monitor and a screen at the same time?

  • Do the following:

    1. Make sure the projector and computer are turned off.
    2. Disconnect your monitor cable from your computer's video port and connect it to the projector's Monitor Out port.
    3. Connect a VGA computer cable to your computer's video port and to the projector's Computer1 port.

    Note: Do not connect the VGA cable to the projector's Computer2 port; this will not work.

    If your image colors look wrong, try changing the Input Signal setting to RGB.

    Note: Some LCD monitors may not be able to display the image correctly. If you have trouble displaying the image, connect a multiscan monitor. If you're projecting computer images, make sure the computer's refresh rate is set to 60 Hz or greater.

Published:  9-Nov-2017 Was this helpful​? Thank you for the feedback!
Please tell us why this was not helpful.​
Please enter a valid email address