How do I log in to the Creston Connected web page?
Do the following:
- Make sure the projector is turned on.
- Start your web browser on a computer or device connected to the network.
- Type the projector's IP address into the browser's address box and press the computer's Enter key. You will see the Epson Web Control screen.
Note: The Epson Web Control screen may look different, depending on the projector.
- Select Creston Connected.
- If you see the screen below, click Advacned to continue.
- Click the Proceed to projectors IP address link.
- If you see a log in window enter the default user name EPSONWEB, then enter the default password, the projector's serial number.
Note: Make sure you enter EPSONWEB and the default password as uppercase characters.The Creston Connected menu will appear.
Published: 19-Jul-2021 Was this helpful? Thank you for the feedback!