text.skipToContent text.skipToNavigation

How do I connect my WPS-enabled wireless router to my product?

    See below.

    Using WPS to Connect to a Network

    If you have a WPS-enabled wireless router or access point, you can use Wi-Fi Protected Setup (WPS) to connect your product to the network.

    Note: This setting can be locked by an administrator. If you cannot access this setting, contact your administrator for assistance.

    1. Press the  home button, if necessary.
    2. Press the icon. You see a screen like this:

    3. Select Router > Change Settings > Push Button Setup (WPS).
    4. Follow the instructions on the LCD screen to complete WPS setup.
    5. Press the  home button to exit. You see the icon on the LCD screen and should be able to connect to your product directly from your computer or device, and then print. If you are printing from a computer, make sure you installed the network software as described on the Start Here sheet.

      Note: If you don't see the icon, repeat these steps to try again.

Published:  16-Nov-2017 Was this helpful​? Thank you for the feedback!
Please tell us why this was not helpful.​
Please enter a valid email address