- Store
- Printers
- Ink
- Projectors
- Scanners
- Point of Sale
- Robots
- Industries
- Support
Select the questions to view the answers
- How do I change my product sources using RS-232 command codes when viewing images in Split Screen mode?
- How do I replace the lamp?
- When should I replace the projection lamp?
- How do I tell which lens I have by the serial number of the lens?
- How do I connect a monitor to my product so I can simultaneously view images on the monitor and from my product?
- I can't play movies from my computer on my product. What should I do?
- The product's buttons don't work. What should I do?
- Is there a Management Information Base (MIB) document available for my product?
- Does my product have discreet IR codes for Power on/off?
- What is Quick Corner?
Select the questions to view the answers
- How do I adjust my product settings for rear and/or ceiling placement?
- When I try to install the USB Display driver, I see the message Inadequate Permissions. What should I do?
- How do I connect my image source to my product?
- How do I present image or movie files from an external drive or USB flash memory drive?
- Can my product do rear projection?
- Nothing projects on the screen. What should I do?
- How do I connect a monitor to my product so I can simultaneously view images on the monitor and from my product?
- How do I connect my digital camera or other device to my product?
- I am unable to connect my Mac to my product. What should I do?
- Can I connect my product to a network?
- Can I place my product in an enclosure or shelf cabinet?
- How do I mount my projector on the ceiling?
- Does my product support stacking?
- How do I connect my product?
- I am using Cisco VPN AnyConnect for Mac and cannot connect to my product using the EPSON EasyMP Network Projection Software v2.77, what is wrong?
- Can I use a USB connection to project from my computer?
Select the questions to view the answers
- I see the message No Signal. What should I do?
- The message Not Supported is displayed. What should I do?
- The power light will not turn on. What should I do?
- The product indicates an error. What should I do?
- When I try to access the Network Configuration menu, my product displays the message, Protected by Password. Enter Password to use projector. What should I do?
Select the questions to view the answers
- I see static or noise in the image. What should I do?
- The image is too dark or light, or the colors are incorrect. What should I do?
- The image is not rectangular. What should I do?
- How do I adjust the color for multiple projectors that are projecting from the same source?
-
How soon should I see an image after I press the
Power button?
- How do I select the image source?
- I can't play movies from my computer on my product. What should I do?
- I see dark vertical bands when projecting from a computer. What should I do?
- Part of my image is blurred or out of focus. What should I do?
- My image has a blue cast when I connect my video equipment to my product with a VGA connection. What should I do?
- My displayed image appear jittery or shaky when I connect a DVD player or VCR to my product. What should I do?
- Only part of the picture is displayed or the image looks distorted. What should I do?
- How can I improve the image quality?
- Can I display on the screen and a computer monitor simultaneously?
- How can I adjust the colors?
- I see only a black screen when I connect an HD video device to my product through an AV receiver using an HDMI cable. What should I do?
- The image on my screen appears red, pink, or magenta. What should I do?
- Can I view the image on my laptop or computer at the same time it is displayed on my product screen?
- When I play movies through my DVD player and my product, the screen has a green cast. What should I do?
- When I browse through the image files on my USB drive, some of the .jpg files have an icon rather than the thumbnail preview. What should I do?
- How do I resize the screens in Split Screen mode?
- A black box appears where a video should appear when I project from my computer. What should I do?
Select the questions to view the answers
- How do I replace the lamp?
- How do I reset the lamp timer to zero?
- When should I replace the projection lamp?
- Can I access the lamp and air filter with the ceiling mount installed?
- How and when should I clean the lens?
- When and how should I clean or replace the air filter?
- How do I clean my product case?
Select the questions to view the answers
- How do I set a password on my product?
- After upgrading EMP Monitor or EasyMP Monitor on my computer, no projectors appear on the screen when I launch EasyMP Monitor. What should I do?
- In EMP SlideMaker 2, my PowerPoint files don't display thumbnails and I can't paste them into scenarios. What should I do?
- What is the EasyMP Monitor software?
- Can I access my product from different operating systems on the same network?
- Can my product be viewed via the Network Neighborhood on a Windows computer?
- What are the escape codes for my product?
- How do I manage my product on a network (wired or wireless)?
- How do I tell which lens I have by the serial number of the lens?
- How do I change my product sources using RS-232 command codes when viewing images in Split Screen mode?
- I want to install the EasyMP Multi PC Projection utility but I can't find it. What should I do?
- When I present with the Epson Network Projection software, my presentation gets interrupted by another user connecting to the product. How can I block the other users from disconnecting my session?
- Where can I find instructions on using the Epson iProjection software for Windows or a Mac computer?
- My projector screen displays my extended desktop when I use iProjection in Windows. How can I mirror or duplicate the display?
- My projector displays a black desktop when I project from a LAN source with Epson iProjection running macOS 10.15.x, 11.x, 12.x, 13.x, or 14.x. What should I do?
Select the questions to view the answers
Select the questions to view the answers
Select the questions to view the answers
- Is there a recommended sequence of turning on my product and peripherals?
- How should I transport my product?
- What is my product's native resolution?
- What accessories are available for my product?
- The product won't go into sleep mode. What should I do?
- Can I connect my product to external speakers?
- I entered the wrong password three times and now my product's operation is locked. What should I do?
- What are the different Color Modes on the Video menu used for?
- What is Quick Corner?
- What does the Split Screen feature do?
- Can I change my product's network name?
- Does my product offer network monitoring and control capabilities?
- What is DICOM Simulation Mode?
- What is the Test Pattern feature?
- What does the Direct Power On feature do?
- I forgot my product's password. What should I do?
- What are the security features on my product?
- Is there a Management Information Base (MIB) document available for my product?
- Which wireless security modes does my product support?
- Does my product have electric lens shift, zoom, and focus functions?
- Does my product have discreet IR codes for Power on/off?
- Does my product support simultaneous displays from different sources?
- My networked product is displaying an Event ID error code. What should I do?
- What are the wireless networking specifications for connection and content over IP?
- What is the RS232 command to retrieve my product's temperature status?
- Is it possible to reset my product?
- Does my product support SNMP?
- How do I control my product remotely over a network?
- Is it okay to move my product right after I shut it down?
- Does Epson have a program where I can donate my working electronic equipment?
