How do I load plastic cards in the input tray?

  • You can load plastic cards that meet the card specifications in the input tray.
    1. Open the input tray, pull out the output tray, and open the stopper. Do not pull out the extensions.
    2. Slide the input tray edge guides all the way out.
    3. Check to make sure that the page separation lever is in the position shown here.

      Note: To prevent paper jams, make sure to set the lever back to its original position when scanning standard single- or multi-page originals.

    4. Load one plastic card printed side down and top edge first into the input tray horizontally, and slide it in until it meets resistance.

      Note: Do not load plastic cards vertically.

    5. Slide the edge guides against the edges of the card.
    Related references
    Page Separation Lever
    Related information
Published:  8-Aug-2017 Was this helpful​? Thank you for the feedback!
Please tell us why this was not helpful.​