How do I change the Power Off and Sleep Timer settings?

• See below.

  Changing the Sleep Timer Settings

  You can adjust the time period before your product enters sleep mode and turns off the LCD screen.

  Note: This setting can be locked by an administrator. If you cannot access or change this setting, contact your administrator for assistance.

  1. Press the  home button, if necessary.
  2. Select Settings.
  3. Select Common Settings. You see a screen like this:
     
     
  4. Select Sleep Timer. You see a screen like this:
     
     
  5. Do one of the following:
     • Press the – or + icon to decrease or increase the number of minutes.
     • Press the number of minutes on the LCD screen, select the number of minutes from the on-screen keypad, and select OK.
  6. Select OK.

  Changing the Power Off Settings

  You can have the product turn off automatically if it is not used for a specified period of time.

  Note: This setting can be locked by an administrator. If you cannot access or change this setting, contact your administrator for assistance.

  1. Press the  home button, if necessary.
  2. Select Settings.
  3. Select Common Settings. You see a screen like this:
     
     
  4. Select Power Off Settings.
  5. To set the amount of time before the scanner turns off when it is inactive, select Power Off If Inactive and select a value.
  6. To turn the scanner off automatically if the USB connection is disconnected, set Power Off If Disconnected to On.
  7. Press the  home button or select Close to exit.