Support Printers Printer Options Epson SD-10 Spectrophotometer

How do I measure the difference between two colors with the product?

    1. Press the button to turn on the product.
    2. Make sure the product is in Spot mode.

      Note: If the product is not in Spot mode, press the back button on the product until you see the home screen.

      Select > Measurement Settings > Measurement Mode > Spot.

      Press the back button until you return to the home screen, then select .

    3. Make sure the sensor cover on the bottom of the product is open.
    4. Place the measurement window (aperture) over the target surface.

      Note: Use the alignment marks on the sides of the sensor as guides when you want to align the device with the center of the item being measured.


    5. Press the enter button on the top of the product to record the measurement. The measurement results are displayed on the LCD screen; the border around the screen will change color to match the measured surface.
    6. Repeat steps 3 and 4 to measure a second surface. When the second measurement is complete, a delta E (∆E) value will appear on the product’s LCD screen. The smaller the value, the more similar the two colors are to each other.
Published:  18-Aug-2022 Was this helpful? Thank you for the feedback!
Was this helpful?
Please tell us why this was not helpful.