How do I set up my product?

• See the instructions below for your connection type:
  
  Network Connection
  (Wireless or Wired)
  
  1. If you're connecting to a network, use an Ethernet cable such as the one that came with your printer.

  Ethernet network cable (included)

  IMPORTANT:
  Connect the cable for either a wireless or wired connection. For a wireless connection, you'll remove the cable later.
  2. Install your software using the Network Installation Guide.
  
  Direct Connection (USB)
  1. If you are NOT installing your product on a network, connect it using a USB cable (not included).
     
     You can purchase a USB cable at most electronics stores.

  USB cable (not included)

  2. Set up your product and install your software as described on the Start Here sheet.