How do I connect my product to my wireless network using my product's control panel?

• Do the following:
  1. Press the Setup button, if necessary.
  2. Press the arrow buttons and then select Wi-Fi/Network Settings.
  3. Select Wi-Fi Setup.
  4. Select Wi-Fi Setup Wizard.
     
     Note: If you need to disable the wireless network to set up your product on an Ethernet network, press the arrow buttons and select Disable Wi-Fi instead. Then follow the instructions on the Start Here sheet to set up your product on a wired network and install the necessary software from the product CD. The installer program guides you through network setup.
  5. Select the name of your wireless network or enter the name manually.
     
     Note: To enter the wireless network name manually, press the arrow buttons and then select Other SSIDs. Use the displayed keypad to enter your network name, as described in the next step.
  6. Enter your wireless password (or network name and then password) using the displayed keypad.
     • Press the arrow buttons to move the cursor to the previous or next space.
     • Press the number buttons repeatedly to select uppercase letters (ABC), lowercase letters (abc), or numbers (123) and symbols (*!#&).
     • To enter a space, select .
     • To delete characters, select .
     • When you finish entering characters, press the OK button.
  7. Confirm the displayed network settings and press the OK button to save them.
     
     Note: If you need to change a setting, press the Back button.
  8. If you want to print a network setup report, press on of the Start buttons.(Otherwise, press Cancel.)
  9. Press the Copy button to exit.
     
     The WiFi light should now be on, but not flashing.
     
     Note: If the WiFi light is off, you may have selected the wrong network name or entered the password incorrectly. Repeat these steps to try again.