Can I connect my product to my wireless network using the buttons on the control panel?

• You can select or change wireless network settings using your product control panel.

  To install your product on a wireless network, follow the instructions on the Start Here sheet and install the necessary software from the product CD. The installer program guides you through network setup.

  Note: Breakdown or repair of this product may cause loss of network data and settings. Epson is not responsible for backing up or recovering data and settings during or after the warranty period. We recommend that you make your own backup or print out your network data and settings.

  1. Press the home button, if necessary.
  2. Press the arrow buttons to select Wi-Fi Setup and press the OK button. You see this screen:

     

  3. Press the arrow buttons to select Wi-Fi Setup Wizard and press the OK button.
  4. Press the arrow buttons to select the name of your wireless network and press the OK button. If you don't see your wireless network's name, you can enter it manually.

     Note: To enter the wireless network name manually, select the Other SSIDs button. Enter your network name as described in the next step.

  5. Enter your wireless password (or network name and the password).

     

     • Press the up and down arrow buttons to scroll through characters. Then press the right arrow button to move to the next character.
     • To switch between ABC (uppercase), abc (lowercase), or 123 (numbers and symbols), press the home button.
     • To delete characters, press the left arrow.
     • When you finish entering characters, press the OK button.
  6. If you want to print a network setup report, press the start button. (Otherwise, press the stop button.)
  7. Press the home button to exit. The WiFi light should now be on, but not flashing.

  Note: If the WiFi light is off, you may have selected the wrong network name or entered the password incorrectly. Repeat these steps to try again.