How do I connect my product with a Wi-Fi connection to a computer or another device without using a wireless router or access point?

  • You can enable Wi-Fi Direct mode to allow direct communication between your product and computer or other devices without a wireless router or access point.
    1. Press the  home button, if necessary.
    2. Select Network.
    3. Select Setup.
    4. Select Wi-Fi Direct Setup. You see this screen:
    5. Select Connection Setup.
    6. Select Change Password and select OK.

      Note: If you have already connected devices or computers to your product via Wi-Fi Direct, they will be disconnected when you change the password.

    7. Enter your Wi-Fi Direct password.

      Note: Your password must be at least 8 and no more than 22 characters long.


      • Press the touch screen buttons repeatedly to scroll through characters.
      • Press or to move the cursor.
      • Press 1 Symb. to enter symbols.
      • Press to delete the previous character.
    8. Press Done when you finish entering your password. You see this screen:
    9. Scroll down to view the SSID (Wi-Fi network name) and password.
    10. Use your computer or wireless device to select the Wi-Fi network name (SSID) displayed on the LCD screen, then enter the password shown.
    11. Press the  home button to exit. You see either an AP or Direct Wi-Fi symbol on the LCD screen and should be able to print directly to your product from your computer or device.

      Note: If the AP or Direct Wi-Fi symbol is not displayed on the LCD screen, Wi-Fi Direct mode is not enabled. Repeat these steps to try again.

Published:  25-Aug-2014 Was this helpful? Thank you for the feedback!
Was this helpful?
Please tell us why this was not helpful.