How do I set up my product with a WPS-enabled router or access point?

• See below.

  Using WPS to Connect to a Network

  If you have a WPS-enabled router or access point, you can use Wi-Fi Protected Setup (WPS) to connect your device to the network.

  Note: To check if your router is WPS-enabled, look for a button labeled WPS on your router or access point. If there is no hardware button, there may be a virtual WPS button in the software for the device. Check your network product documentation for details.

  1. To connect to a WPS-enabled router, press the WPS button on your router or access point.
  2. Press and hold down the Wi-Fi button on your product for 3 seconds. The left side of the network light turns blue to indicate a successful connection.

     Note: Be sure to press and hold the Wi-Fi button on your product within 2 minutes of pressing the WPS button on your router or access point.