How do I reset the ink levels for my product?

• If you refilled the ink tanks but forgot to reset the ink levels, you can reset the ink levels from the control panel by following the steps below.

  Note: The product has a low ink alert system. The accuracy of this system depends on the user refilling the ink tanks correctly. The product cannot directly measure the ink levels in the tanks; instead it estimates the amount of ink remaining by internally monitoring ink usage. The low ink alert system may generate inaccurate messages if the ink tanks are not refilled according to the instructions in the product's User's Guide.

  As a precaution, perform regular visual inspections of the ink tanks to ensure ink levels do not fall below the lower line. Continued use of the product when the ink level is below the lower line on the tank could damage the product.

  1. Press the button, if necessary.
  2. Press the up or down arrow button to select Setup > Maintenance > Reset Ink Levels.
  3. Press one of the Start buttons, then press the OK button.
  4. Press the OK button again.
  5. Press the right or left arrow button to highlight the ink tank you refilled, and press the OK button to select it. Repeat for each ink tank color you refilled.
  6. Press one of the Start buttons to reset the ink levels, then press the OK button when the reset is complete.
  Related tasks
  Refilling the Ink Tanks
  Checking Ink Levels