I'm having paper feed problems. What should I do?

  • If you have problems feeding paper, try these solutions:

    • If paper does not feed for printing, remove it from the rear feed slot or cassette. Reload it, then adjust the edge guides. Make sure the paper stack is not above the tab on the edge guides inside the cassette or rear feed slot.
    • Be sure to insert the paper cassette all the way into your product.
    • If multiple pages feed at once, remove the paper, fan the edges to separate the sheets, and reload it.
    • Do not load more than the recommended number of sheets.
    • Make sure your paper meets the specifications for your product.
    • If paper jams when you print on both sides of the paper, try loading fewer sheets.
    • Make sure the paper size and paper type settings are correct for the paper source.
    • If you installed an optional paper cassette unit, be sure to enable the cassette unit in the printing software.
    • If your product pauses during printing, make sure the front cover is closed.
    • For best results, follow these guidelines:
      • Use new, smooth, high-quality paper that is not curled, creased, old, too thin, or too thick.
      • Load paper in the cassette printable side down.
      • Do not load binder paper with holes in the cassette.
      • Follow any special loading instructions that came with the paper.
    Related references
    Paper Jams Inside the Printer
    Paper Loading Capacity
Published:  15-Feb-2018 Was this helpful? Thank you for the feedback!
Was this helpful?
Please tell us why this was not helpful.
Please enter a valid email address