Which document types does the integrated scanner support?

  • You can load the following document types and sizes into the integrated scanner:

    Width: 5.8 to 36 inches (148 to 914 mm)

    Length: 5.8 to 120 inches (148 to 30480 mm)

    Paper thickness: 0.03 inches (0.8 mm) or less (0.02 inches [0.55 mm] with optional carrier sheet)

    Supported Document Types
    • Plain paper
    • Recycled paper
    • Coated paper
    • Glossy paper
    • Tracing paper*
    • Film
    • Blueprints
    • Actual printing stock
    • Newspaper
    • Flyers
    • Drafting paper

    * When tracing paper is loaded, the product cannot automatically detect the width of the paper. Make sure you set the Original Size setting on the Copy menu or the Scan Size setting on the Scan menu to the size of your original.

    Do not load the following types of originals directly in the scanner, or they may cause paper jams or damage the scanner:

    • Originals that are bound
    • Originals that are bent
    • Originals with carbon backing
    • Originals with staples, paper clips, or glue
    • Originals with many holes (such as loose-leaf paper)
    • Irregularly shaped originals or originals that are not cut at right angles
    • Originals with attached photos, stickers, or labels
    • Transparent originals
    • Glossy originals
    • Torn or deteriorated originals
Published:  19-Aug-2019 Was this helpful? Thank you for the feedback!
Was this helpful?
Please tell us why this was not helpful.
Please enter a valid email address