When I connect my PC to my products 15 pin VGA Computer port, the screen is displayed, but all 4 sides are clipped. What should I do?
The projector's 15 pin VGA “Computer” connector has two video input signal modes; Analog-RGB and RGB-Video. When using this connector with your computer, make sure that you have selected Analog-RGB as the signal mode. If RGB-Video is selected, the displayed image will be clipped on all four sides.
To change the setting, follow these steps:
- Press the Menu button on the control panel or remote control, to bring up the projector's menu.
- Use the arrow buttons to navigate to the Settings menu, then press Enter.
- Select Computer Input and press Enter.
- Select Analog-RGB and press Enter.
Was this helpful? Thank you for the feedback!