My image has a blue cast when I connect my video equipment to my product with a VGA connection. What should I do?

• The problem could be caused by a connection problem or the configuration of your video equipment. Check the following:
  
  Make sure your component video cable is properly connected. The connectors on the cable are color-coordinated. The red, green, and blue connectors should be attached to the red, green, and blue component video-out connectors on your equipment and the red, green, and blue component video-in connectors on the projector.
  
  Make sure the projector's Input Signal setting is set correctly to match the output signal of your connected video equipment.