Support Projectors PowerLite Series Epson PowerLite Home Cinema 1080 UB

I see static or noise in the image. What should I do?

  • Check the following:

    • Make sure the Input Signal is set correctly for your connected video equipment. See Other Setup Options.
    • If you're viewing still images and you notice flickering or horizontal lines, turn on the Progressive setting. See Sharpness and Picture Quality Settings.
    • Make sure your cables are securely connected at both ends.
    • If you're using an extension cable, you may pick up interference if the cable is not adequately shielded. You may need to use a signal amplifier for longer cables.
    • If you're displaying the same image on your laptop computer and projector screen, try turning off your laptop's LCD display.
    • If you're using a computer cable longer than 6 feet (2 meters), or an extension cable, the image quality may be reduced.
    • If you're using a computer, keep your computer and video cables separated from the power cord as much as possible to prevent interference.
    • Select the correct resolution. See Compatible Video Formats.
    • If you're projecting from a DVD player, or other video source, make sure the correct output signal is selected on the device.
Published:  24-Jan-2008 Was this helpful? Thank you for the feedback!
Was this helpful?
Please tell us why this was not helpful.