Support Projectors PowerLite Series Epson PowerLite 83V+

Part of my image is blurred or out of focus. What should I do?

  • Try the following:
    • Adjust the focus.
    • There may be dirt on the lens. Clean the lens.
    • Make sure the lens is not fogged by condensation. You may need to wait before using the projector after moving it from a cold environment.
    • Make sure the projector is positioned correctly and the projection distance is within range. See Positioning the Projector.
    • Adjust the Sharpness setting on the Image menu. See Adjusting Colors and Clarity. You should be able to see the effect on the screen immediately.
    • Make sure the input signal setting on the Signal menu matches the signal from the connected device. See Adjusting the Input Signal.
    • If you're projecting from a computer, you may need to adjust the Tracking and Sync settings. See Adjusting the Input Signal.
Published:  9-Mar-2010 Was this helpful? Thank you for the feedback!
Was this helpful?
Please tell us why this was not helpful.