There is no sound. What should I do?
Try the following solutions:
- Adjust the projector's volume settings or press the volume button on the remote control to turn up the volume.
- Press the A/V Mute button on the remote control to resume video and audio if they were temporarily stopped.
- Press the Source Search button to switch to the correct input source, if necessary.
- Check your computer or video source to make sure the volume is turned up and the audio output is set for the correct source.
- Check the audio cable connections between the projector and your video source.
- Make sure any connected audio cables are labelled "No Resistance".
- If you are using a Mac and you do not hear sound from an HDMI source, make sure your Mac supports audio through the HDMI port. If not, you need to connect an audio cable.
- If you want to use a connected audio source when the projector is off, set the Standby Mode option to Communication On and turn on the Standby Audio option. Note: Try setting the Audio Input to Auto or desired audio input source in the projector's Extended settings.
Connecting to a Computer for Sound
Connecting to a video source for sound
Projector Setup Settings - Extended Menu
Published: 6-Feb-2012 Was this helpful? Thank you for the feedback!