Support Projectors PowerLite Series Epson PowerLite Home Cinema 5020UB

My projected image appears jittery or shaky when viewing video or moving images. What should I do?

  • If you are viewing video from a device connected to the projector's Video, Component, HDMI1, or HDMI2 ports, or a WirelessHD connection (PowerLite Home Cinema 5020UBe only) and the signal being sent is interlaced (480i/576i/1080i), be sure to set the Progressive setting to Film/Auto. See Sharpness and Picture Quality Settings.

    Note:
    Turning on the Progressive setting converts interlaced signals into progressive signals. Select Video for watching videos captured with a video camera. Set to Off when viewing images with a large amount of movement.

    For best results, connect your video equipment to the WirelessHD (PowerLite Home Cinema 5020UBe only), HDMI1 or HDMI2 (High-Definition Multimedia Interface) ports, if possible. If your equipment doesn't support HDMI, connect it to either the Component (for high quality component video) or Video (for composite video).
Published:  30-Nov-2012 Was this helpful? Thank you for the feedback!
Was this helpful?
Please tell us why this was not helpful.