How do I setup a wireless connection?

• You can send images to your projector through a wireless network (PowerLite 95/96W/905/915W/935W/1835). To do this, you must install the optional Epson 802.11b/g/n wireless LAN module, and then set up your projector and computer for wireless projection.

  Note: If your projector is connected via a LAN cable to a network that includes a wireless access point, you can connect to the projector wirelessly using the EasyMP Network Projection software.

  There are two ways to connect the projector to your wireless network:

  • Using the optional Quick Wireless Connection USB Key (Windows only)
  • Configuring the connection manually using the projector's Network menus

  After installing the module and setting up the projector, install the network software from the Epson Projector Software CD on your computer. Use the following software and documentation to set up, control, and monitor wireless projection:

  • EasyMP Network Projection software sets up your computer for wireless network projection. See the EasyMP Network Projection Operation Guide for instructions.
  • EasyMP Monitor software (Windows only) lets you monitor and control your projector through the network. You can download the latest software and documentation from the Epson web site. Go to www.epson.com/support (U.S.) or www.epson.ca/support (Canada) and select your projector.

  Follow the instructions in these sections to set up your projector for wireless projection:

  Installing the Wireless LAN Module
  Using Quick Wireless Connection (Windows Only)
  Selecting Wireless Network Settings Manually
  Selecting Wireless Network Settings in Windows
  Selecting Wireless Network Settings in Mac OS X
  Setting Up Wireless Network Security
  
  Related references
  Optional Equipment and Replacement Parts