How can I improve the image quality?
Make sure you've selected the best Color Mode for your picture and viewing environment. Then use the settings in the Image menu to finish adjusting the picture.
If you are viewing video from a device connected to the projector's Video or S-Video (EX3240/EX5240/EX5240 Pro/EX7240 Pro/VS240/VS340/VS345 only) port, adjust the Deinterlacing and Noise Reduction settings, if available for your video source.
For best results, connect your video equipment to the HDMI port, if possible. If your equipment doesn't support HDMI, connect it to one of the following ports (highest quality listed first): Computer with a VGA-to-component adapter cable (for component video), S-Video (EX3240/EX5240/EX5240 Pro/EX7240 Pro/VS240/VS340/VS345 only), or Video (for composite video).
Note: The Noise Reduction setting is not available if you have done the following:
- Set the Deinterlacing setting to Off
- Selected a digital RGB or an interlaced (480i/576i/1080i) input signal
Image Quality Settings - Image Menu
Published: 3-Sep-2015 Was this helpful? Thank you for the feedback!