How do I use the Picture-in-Picture feature?
Using Picture in PictureYou can use Picture in Picture mode to view two image sources simultaneously.
Note: You can display only HDMI video sources when using Picture in Picture mode.
Note: You cannot use Picture in Picture while projecting 3D images or when Image Processing is set to Fast in the Signal menu.
- Turn on the projector and switch to the HDMI image source you want to use.
- Press the P-in-P button on the remote control.
The second HDMI video source appears as a sub-screen in the corner of the image.
Note: While Picture in Picture mode is active, press the Menu button on the remote control to adjust the size and position of the sub-screen.
- To swap the main screen and sub-screen video sources, press and hold the P-in-P button for at least three seconds.
- Press the P-in-P button again to close the sub-screen and resume normal projection.
Published: 12-Sep-2016 Was this helpful? Thank you for the feedback!