Can I monitor or control my product over a network?

• Yes, you can control and monitor the projector over a network by using the Epson Projector Management Utility software (Windows only).

  You can also control the projector by using a web browser on a Windows computer or Mac to access the projector's Web Control screen. On this screen, you can control different features, including the input source and projector settings. You can also control the projector from different operating systems on the same network.

  Note: The projector's Web Control screen can also be accessed through a web browser on a mobile device. Connect the device to your network, start your web browser, and enter the projector's IP address in the browser's address bar. The Web Control screen appears.

  If you are prompted for a username and password, try entering the following:

  • User ID: EPSONWEB
  • Default password: admin

  If you set Standby Mode to Communication On, you can use the Epson Projector Management Utility software or a web browser to select settings and control projection even if the projector is in standby mode. Also make sure to set the Port setting to Wireless LAN or Wired LAN, depending on your connection type.

  Note: Not all settings and projector functions can be controlled using a web browser.

  Related tasks
  Controlling a Networked Projector Using a Web Browser
  Related references
  Projector Setup Settings - Extended Menu