How do I adjust the color for multiple projectors that project from the same source?
-
See below.
Matching the Screens Automatically
You can automatically correct the brightness and tint for multiple projectors based on the brightness and tint settings you selected for the master projector. You can schedule automatic screen matching using the scheduling function of the projector.Before you start, make sure of the following:
- Select Multi-Projection for the Color Mode setting and adjust the Brightness, Contrast, Color Saturation, Tint, White Balance, and Advanced settings in the Image menu, as necessary, on the master projector.
- You are projecting on a matte white diffusion screen that is flat and even.
- The projected image is between 100 to 300 inches (254 to 762 cm) and is rectangular after tiling.
- All the projectors are connected to a network and the Location Setup setting has been configured.
- Nothing is blocking the built-in camera on the front of each projector.
- The projected images do not overlap or have gaps between them.
- The projectors are installed parallel to the screen.
- The Blend Range setting is set between 15 to 45%.
- The Brightness Level is set to the maximum for all projectors.
- The model number of all projectors is Pro L30000UNL or Pro L30002UNL.
Note: Auto adjustment is not available for the following lenses: ELPLR05, ELPLL09, or ELPLL10. After auto adjustment, the movement range for lens shift is reduced.
- Press the Menu button.
- Select the Extended menu and press Enter.
- Select the Multi-Projection setting and press Enter.
- Select the Screen Matching setting and press Enter.
- Select Start Auto Adjustment press Enter.
When adjustment starts, you see an adjustment pattern. Adjustment is complete when you see a displayed image.
After automatic adjustment, the Color Uniformity and Color Matching settings are returned to their default values. The Light Source Control setting is set to Off.
Related tasks
Changing the Color Mode
Configuring Tiling Automatically
Blending the Image Edges
Related references
Image Quality Settings - Image Menu
Projector Parts - Front/Top
Matching the Screens Manually
You can manually correct the brightness and tint for multiple projectors.Note: We recommend that you reset the following settings on the Image menu before beginning manual screen matching: Brightness, Contrast, Color Saturation, Tint, White Balance (all settings), Gamma, and RGBCMY.
- Press the Menu button.
- Select the Extended menu and press Enter.
- Select the Multi-Projection setting and press Enter.
- Select the Screen Matching setting and press Enter. You see a screen like this:
- Select the Color Matching setting and press Enter. You see this screen:
- Press the left or right arrow buttons to select a value for the Adjustment Level setting.
Note: There are eight adjustment levels ranging from white to black and you can adjust each level individually.
- Press the left or right arrow buttons to adjust the color tone for the Red, Green, and Blue settings.
- Press the left or right arrow buttons to adjust the Brightness setting.
- Repeat the previous three steps as necessary to adjust each adjustment level.
- Press the Esc button to return to the previous screen.
Published: 10-Sep-2020
Was this helpful? Thank you for the feedback!