The product's light(s) indicate an error. What should I do?

• The lights on the projector indicate the projector status and let you know when a problem occurs. Check the status and color of the lights and look for a solution in the table here.

  Note: If the Illumination setting is Off, all indicator lights are off under normal projection conditions.

  
  
  

  1	On/Standby light
  2	Status light
  3	Laser light
  4	Temp (temperature) light

  On/Standby light	Status light	Laser light	Temp light	Status and solution
  Blue	Blue	Off	Off	Normal operation.
  Blue	Flashing	Off	Off	Warming up. Wait for an image to appear.
  				Shutting down. (When the Status light stops flashing, you can unplug the projector.)
  Blue/Off	Off	Off	Off	Standby mode or monitoring.
  Flashing	Off	Off	Off	Preparing for monitoring or quick startup mode; all features are disabled.
  Flashing	Varies	Off	Flashing	Projector is too hot. If the temperature continues to rise, projection will stop automatically. Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects. Clean or replace the air filter. Make sure the environmental temperature around the air intake vents is not too hot.
  Off	Flashing	Off	Solid	Projector has overheated and turned off. Leave it turned off to cool down and wait about five minutes. After the fan has stopped, disconnect the power cord and do the following: Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects. Make sure the environmental temperature around the air intake vents is not too hot. Clean or replace the air filter. If operating the projector at high altitude, turn on High Altitude Mode. If the problem persists, unplug the projector and contact Epson for help.
  Flashing	Varies	Flashing	Off	Laser warning. Turn the projector off, unplug it, and contact Epson for help.
  Off	Flashing	Solid	Off	Laser has a problem. Turn the projector off, unplug it, and contact Epson for help.
  Off	Flashing	Off	Flashing	A fan or sensor has a problem. Turn the projector off, unplug it, and contact Epson for help.
  Off	Flashing	Flashing	Off	Internal projector error. Turn the projector off, unplug it, and contact Epson for help.