How should I clean and disinfect the product?

• Do the following to clean the product:

  1. Disconnect all cables from the product.
  2. Clean the connector ports on the intelligent controller with a dry cloth. If you're unable to clean the ports with a dry cloth, use a damp cloth.
  3. Clean the lens or camera with a soft, dry cloth. Do not use liquid, organic, or chemical cleansers. If you cannot get the smart glasses clean with a dry cloth, use a damp cloth.

     Note: Do not use lens cleaning liquids or organic solvents.

  To disinfect the product, do the following:
  1. Disconnect all cables from the product.
  2. Clean the connector ports on the intelligent controller with a dry cloth. Make sure the connector ports on the interface unit are free from dirt or foreign objects.
  3. Lightly spray one of the disinfectants listed below on a cloth and clean the product.

     Caution:
     Do not spray disinfectant directly on product.

     • Alcohol-based disinfectants
     • Sodium hypochlorite
     • Hypochlorous acid water
  4. Wipe off any disinfectant remaining on the product with a damp cloth. Make sure the product is completely dry before you use it.