Support Wearables Moverio Epson Moverio BT-45CS

How should I clean and disinfect the product?

  • Do the following to clean the product:

    1. Disconnect all cables from the product.
    2. Clean the connector ports on the intelligent controller with a dry cloth. If you're unable to clean the ports with a dry cloth, use a damp cloth.
    3. Clean the lens or camera with a soft, dry cloth. Do not use liquid, organic, or chemical cleansers. If you cannot get the smart glasses clean with a dry cloth, use a damp cloth.

      Note: Do not use lens cleaning liquids or organic solvents.

    To disinfect the product, do the following:
    1. Disconnect all cables from the product.
    2. Clean the connector ports on the intelligent controller with a dry cloth. Make sure the connector ports on the interface unit are free from dirt or foreign objects.
    3. Lightly spray one of the disinfectants listed below on a cloth and clean the product.

      Caution:
      Do not spray disinfectant directly on product.

      • Alcohol-based disinfectants
      • Sodium hypochlorite
      • Hypochlorous acid water
    4. Wipe off any disinfectant remaining on the product with a damp cloth. Make sure the product is completely dry before you use it.
Published:  16-Nov-2022 Was this helpful? Thank you for the feedback!
Was this helpful?
Please tell us why this was not helpful.