Support Projectors Cinema Series Epson Home Cinema 2250

How do I connect my image source to the product?

  • See below.

    Projector Connections

    See these sections to connect the projector to a variety of projection sources.

    Caution:
    If you will use the projector at altitudes above 4921 feet (1500 m), turn on High Altitude Mode to ensure the projector's internal temperature is regulated properly.

    Related references
    Projector Setup Settings - Extended Menu
    Additional Components

    Connecting to an HDMI Video Source

    If your video source has an HDMI port, you can connect it to the projector using an optional HDMI cable. The HDMI connection provides the best image quality.
    1. Connect the HDMI cable to your video source's HDMI output port.
    2. Connect the other end to the projector's HDMI port.

    Note: The projector converts the digital audio signal sent from your video source into a mono analog signal for the internal speaker or a stereo analog signal if you are connecting to external speakers.

    Note: When an audio/video source that meets the HDMI CEC standard is connected to the projector's HDMI port, you can use the projector's remote control to control certain features of the linked device by turning on the HDMI Link setting in the Settings menu.

    Note: If you have problems hearing audio through the HDMI connection, make sure the Audio Out Device setting in the Settings menu is set correctly.

    Related references
    Projector Feature Settings - Settings Menu

    Connecting to a Computer for HDMI Video and Audio

    If your computer has an HDMI port, you can connect it to the projector using an optional HDMI cable.

    Note: To connect a Mac that includes only a Mini DisplayPort, Thunderbolt port, or Mini-DVI port for video output, you need to obtain an adapter that allows you to connect to the projector's HDMI port. Contact Apple for compatible adapter options.

    1. Connect the HDMI cable to your computer's HDMI output port.
    2. Connect the other end to the projector's HDMI port.

    Note: The projector converts the digital audio signal sent from your computer into a mono analog signal for the internal speaker or a stereo analog signal if you are connecting to external speakers. (Make sure the HDMI audio playback device on your computer's audio settings is set to EPSON PJ.)

Published:  22-Oct-2020 Was this helpful? Thank you for the feedback!
Was this helpful?
Please tell us why this was not helpful.