I see the message No Signal. What should I do?
If the "No Signal" message appears, try the following solutions:
- Press the Source Search button and wait a few seconds for an image to appear.
- Turn on the connected computer or video source, and press its play button to begin your presentation, if necessary.
- Check the connection from the projector to your video sources.
- If you are projecting from a laptop computer, make sure it is set up to display on an external monitor.
- If necessary, turn the projector and the connected computer or video source off and then on again.
- If you are projecting using a thumb-sized media streaming device, set the HDMI EQ Setting to 1 in the projector's Settings > Operation menu.
- Connect the video source directly to the projector.
- Try a different video cable.
- If the other solutions do not solve the problem, reset all of the projector settings using the options on the Reset menu.
Projector Feature Settings - Settings Menu
Projector Reset Options - Reset Menu
Published: 30-Oct-2020 Was this helpful? Thank you for the feedback!