There is no sound. What should I do?

• If there is no sound when you expect it or the volume is too low or high, try the following solutions:

  • Adjust the projector's volume settings.
  • Press the A/V Mute button on the remote control to resume video and audio if they were temporarily stopped.
  • Check your computer or video source to make sure the volume is turned up and the audio output is set for the correct source.
  • Check the cable connection between the projector and your video source.
  • If you do not hear sound from an HDMI source, set the connected device to PCM output.
  • If you are using the USB Display function, turn on the Output audio from the projector setting in the Epson USB Display Settings program on your computer.
  • If you are using a Mac and you do not hear sound from an HDMI source, make sure your Mac supports audio through the HDMI port. If not, you need to connect an audio cable.
  • If you want to use a connected audio source when the projector isn't projecting any images, set the Quick Startup option in the Operation menu to Off and make sure the A/V Output setting in the Signal I/O menu is set to Always On.
  • If the volume for the computer is set to the minimum while the projector's volume is set to maximum, the sound level may be mixed. Turn up the computer's volume and decrease the projector's volume.
  • Make sure the Audio Out Device option is set to the correct audio port for your video device.
  Related tasks
  Controlling the Volume with the Volume Buttons
  Related references
  Input Signal Settings - Signal I/O Menu
  Related information
  Connecting to Computer Sources
  Connecting to Video Sources