Part of my image is blurry or out of focus. What should I do?

• If the projected image is fuzzy or blurry, try the following solutions:

  • Clean the projection window.

    Note: To avoid condensation on the projection window after bringing the projector in from a cold environment, let the projector warm up to room temperature before using it.

  • Position the projector close enough to the screen.
  • Position the projector so the keystone adjustment angle is not so wide that it distorts the image.
  • If you are projecting from a computer, use a lower resolution or adjust the computer's resolution to match the projector's native resolution, if possible.
  • Display a test pattern and use it to adjust the image focus using the focus lever.
  • Adjust the Sharpness setting to improve image quality.
  Related tasks
  Cleaning the Projection Window
  Focusing the Image
  Related references
  Image Quality Settings - Image Menu