I see the message No Signal. What should I do?

• If the "No Signal" message appears, try the following solutions:

  • Press a source button on the remote to select an available source. Wait a few seconds for an image to appear.
  • Turn on the connected computer or video source, and press its play button to begin your presentation, if necessary.
  • Check the connection from the projector to your video sources.
  • If you are projecting from a laptop computer, make sure it is set up to display on an external monitor.
  • If necessary, turn the projector and the connected computer or video source off and then on again.
  • Try a different video cable.
  • If you connected a streaming device, try a different power cable or use external power.
  • If your streaming device is connected to a soundbar or receiver, make sure you have selected the correct source on your soundbar or receiver.
  • If the other solutions do not solve the problem, reset all of the projector settings using the options on the Initial/All Settings menu.
  Related tasks
  
  • Displaying From a PC Laptop
  • Displaying From a Mac Laptop